You have a favorite gold-plated piece, maybe a name necklace you wear every day, that's starting to look a little dull or grimy.
You want to bring back its shine, but you're nervous about cleaning it the wrong way and wearing off the gold.
Here’s how to clean gold plated jewelry safely: all you need is a bowl of warm water, a few drops of mild dish soap, and a soft cloth. Gently wipe the piece, rinse it with clean water, and then dry it completely. The whole job is about avoiding anything abrasive that could strip the thin gold layer.
We make plated name jewelry, and this is exactly the routine we'd use on our own pieces.
We'll walk you through the simple steps, show you what cleaners to skip, and explain what to do if your jewelry still looks dull after cleaning.
Before you start: what's under the gold
The term "gold plated" means your piece has a thin layer of gold bonded over a different base metal.
On our product pages, you'll see the metal listed for each item. Our pieces come in three main builds: 14k gold over sterling silver, gold plated over brass, and 14k gold over stainless steel.
The gentle cleaning routine is the same for all of them.
The base metal really only matters if the gold layer wears through. Worn sterling silver can darken, while brass might look coppery or leave a green mark on your skin.
Our team's view is that the gold layer is the part you're protecting, so every step is about not rubbing it away.
What you need to clean your jewelry (and what to avoid)
You don't need any special jewelry cleaners, since you probably have everything in your kitchen already.
Here's your cleaning kit:
- A small bowl of warm (not hot) water.
- A few drops of a mild, fragrance-free dish soap.
- A soft, lint-free cloth, like a microfiber cloth for glasses.
- An extra-soft toothbrush (a baby toothbrush is perfect) for getting into chains, lettering, and around stones.
- A clean, dry towel for patting it dry.
And just as important, here’s what to skip. Our rule of thumb: if you wouldn't rub it on your skin, don't rub it on plated gold.
- Abrasives: Toothpaste and baking soda are gritty and can wear the plating away.
- Acids: Vinegar, lemon juice, and other acidic cleaners are too harsh.
- Harsh chemicals: Keep your jewelry far away from bleach, ammonia, and chlorine. That includes taking it off before you get in a pool or hot tub.
- Jewelry "dips": Dips made for solid gold or silver can strip plating.
- Heavy machinery: Ultrasonic cleaners and steam can loosen the bond of the plating and dislodge small stones.
- Paper products: Paper towels and tissues feel soft, but their fibers can be abrasive.
A quick wipe with rubbing alcohol now and then won't ruin your piece, but using it regularly can dull the finish. Simple soap and water does the job better and more gently.
Step 1: Soak for a few minutes
Place your jewelry in the bowl of soapy water.
A short soak, just a few minutes, is enough to start loosening any buildup from lotion, sweat, and natural skin oils.
Don't forget about it and leave it soaking for hours, especially if your piece has cubic zirconia (CZ) stones.
Step 2: Gently wipe, don't scrub
Take the piece out of the water and gently wipe the surfaces with your soft cloth. Use light, careful passes.
For the tricky spots, like the gaps in a script nameplate, the links of a Cuban or Figaro chain, or the settings around stones, use the extra-soft toothbrush. The key is to use almost no pressure, just letting the bristles do the work.
We'd always rather you clean a little and often than scrub hard once. Scrubbing hard on one spot is how the gold wears thin on the sharp edges of letters first.
At Tres Colori, we design our Double-Plated Necklaces to be worn every day, but they still deserve this gentle routine. A piece like our Double Plated Heart Name Necklace has lots of details in the lettering and chain that only a soft brush can reach.
Step 3: Rinse with clean water
Next, rinse your jewelry under clean, lukewarm water.
You want to make sure all the soap film is gone, because leftover residue can make a clean piece look cloudy again.
We'd suggest rinsing it over a bowl or just closing your sink drain. It's too easy for an earring back or a small pendant to disappear down the drain.
Step 4: Dry it completely
Pat the jewelry dry with a soft, clean towel.
Then, let it air dry completely before you put it away.
Chains, clasps, and the backs of settings can trap water, so give them plenty of time. Putting a piece away while it's still damp is a common mistake.
Step 5: Finish with a soft, dry cloth
Once it's totally dry, a final buff with a dry microfiber cloth will bring back that beautiful shine.
Just be sure to skip any pre-treated polishing cloths. Some come soaked in chemical cleaners designed for solid silver or gold, and they can take the plating off with the tarnish.
What if it still looks dull after cleaning?
We've got good news and bad news for you.
The good news is that a gentle cleaning will usually remove surface dirt, lotion, and oils. The bad news is that if your piece still looks dark, brassy, silvery, or patchy after you've cleaned it, the gold has most likely worn through in that spot.
And no cleaner brings back gold that's gone.
To make gold-plated jewelry look gold again where it has worn away, you'd need it replated. A local jeweler can tell you if that's an option for your specific piece.
If you see a green mark on your skin, it's usually the base metal reacting with your skin where the plating has worn thin.
How to keep your gold plated jewelry looking new
The best way to keep your plated jewelry shiny is to make a few simple habits part of your routine.
- Put your jewelry on last, after you've applied any lotion, perfume, or hairspray.
- Take it off first. Don't wear it to the gym, while swimming, when cleaning with chemicals, or while you sleep.
- After you take it off, give it a quick wipe with a soft cloth. Something is better than nothing!
- Store pieces separately in a soft pouch or a lined jewelry box. This stops chains from scratching nameplates and tangling with each other.
- Give it a gentle soap-and-water clean whenever it starts to look dull or after a particularly hot, sweaty day.
So, can you shower with your gold-plated jewelry? Plenty of our customers tell us they shower in their pieces every day with no color change. But soap, shampoo, and hot water do contribute to wear over time.
We'd recommend taking it off when you can to help the plating last as long as possible.
If it's time for a new everyday piece, or you're looking for a personalized gift, feel free to browse our collection of name necklaces here at Tres Colori.